FRONT ATTACHMENTS
SNOWCUTTER
For icy and encrusted slopes
Operation
The toothed bar is lowered by means of the pivoting ram, and breaks up hard icy slopes into large lumps which are further reduced in size by the tracks and then restored to skiing condition by the tiller.
The toothed bar swings back automatically if it strikes rocky ground. As with the All-Way-Blade, hydraulical adjustment is by means the front hydraulic control valve and the quick-mount-system.
PARKBLADE
The Art of Designing Funparks
Loads up to 1,000 kg are no problem for the ParkBlade and your PistenBully. In addition, only in extreme cases load-securing straps are necessary to fix the loading.
Another advantage
The ParkBlade has a serrated finisher bar. This enables the driver, to gibe the Funpark-elements like Bankturns, Tables or Jumps a uniform and attractive surface structure in one machining operation when backblading.
The ParkBlade is a standard equipment of the PistenBully 200 Park, the PistenBully 300 Park, the PistenBully 400 Park and the PistenBully 600 Park. Optional it can also be mounted on standard vehicles of the model range PistenBully 200/ 300/ 400 and 600, if the vehicles have been prepared for this.
FRONT SNOW-BLOWER
Efficient snow movements
degrees. Its angle is also adjustable. The ejector flaps on the chutes are repositiones hydraulically, so that the ideal ejecting time and distance can be chosen. Two double-acting control circuits are used, with operation from the front-end attachment controls in the driver’s cabin. The attachment can be repositioned sideways so that it can operate across the entire width of the vehicle.
PistenBully 200/ 300/ 400/ 600
Exceptionally robust, two-stage blower with high performance reserves and double spiral tillers, plough wheel and discharge cross-section for excellent efficiency. Drive and gears are rated for high engine speeds; as a result large ejection distances can be achieved. Considerable increase in performance, in particular in forward movement speed, due to narrow construction. Better front vision as a result of only one ejector chute and fewer moving parts.
SNOW BUCKET
The transport genius
The Snowbucket can be set at two different levels via hydraulic cylinders. The bucket is lowered to collect the snow and, once full, is tipped and raised simultaneously to ensure safe transport of its load. The bucket is then tipped back down to empty. All working movements are controlled from the comfort of the driver’s cab. A high level of accuracy is possible thanks to the positioning of the Snowbucket in driver’s direct field of vision.
Design
The Snowbucket is connected directely to your PistenBully via the front quickmount-system. The Snowbucket has a torsionally rigid, welded construction made from high-grade sheet steel. The entire unit is coated in anti-corrosion paint.
PIPEMAGICIAN
Funpark specialist
Worn areas of the Halfpipe can be leveled without having to use the vehicle’s steering.
Can be used on all vehicles!
Thanks to its light weight, the PipeMagician can be attached to all PistenBully models from the PB 240 D if they are prepared accordingly (high pressure supply at front.
How it works:
The Halfpipe is created at the defined radius by means of scraper, snow transport and snow compacting elements. These elements, which can be easily exchanges, are attached to a chain which is driven by two hydraulic motors and two rubber-lined friction cable pulleys. The running speed of the elements is controlled by potentiometer. If the chain direction is reversed, the jump-off edge is formed by the counterrotating effect. Plastic finishers, which are repositioned manually when the PipeMagician is slewed, are used to finish the snow surface. By tilting the PipeMagician, a Halfpipe for amateurs or professional events can be produced. A standard tilt angle display informs the driver when the desired tilt angle is reached.
BLADE LOADER
Snow transporter
loader is opened and the snow dumped onto the worn-out slope section, before being spread using the blade. The blade loader is conveniently operated from within the driver’s cab.
Design
The blade loader is designed to be fitted to the conventional U-blade or the All-Way-Blade on your PistenBully. It is easy to mount and dismount. What’s more, you can decide to equip your vehicle with a blade loader at any time.
TRANSPORT BOX
Safe transportation
Design
The Transportbox consists of galvanized sheet metal with a thickness of 1.0 mm to 2.0 mm and is powder-coated. The Transportbox has a rubber floor to prevent goods from moving during transport.
